Vi kan säljer fina air ride kits för många bilar, till exempel:

EZAirride Classic Kit till Impala - 15.300:- fritt Nora (inkl frakt, tull och Moms)



Chevy Impala EZ Air Ride Classic Kit

Our Classíc air ride kits feature our FBSS Billet Control Panel. This control panel has 2 of our exclusive EZ Air Ride dual needle gauges and 4 analog paddle valves. When you put this together with our vehicle specific SET IT AND FORGET IT brackets, a Viair 444c Chromes Compressor, 4 Airlift Dominators, a 7 gallon air tank, and our custom designed fittings and you get that stance you've been looking for.

EZ Air Ride kits are designed for easy installation with maximum drop. No major fabrication is involved; these kits are 100% bolt-on ready. Our kit come with top quality parts, ensuring the user the highest level of performance possible. The EZ Air Ride kits are the most budget friendly in the industry, promising users a full wallet after their purchase. EZ Air Ride has exclusive parts you won't find anywhere else, such as: fittings, gauges, air tanks, and valves. With our quality parts and low prices, no one can compete with us.

Before Buying

Before you spend a grand on an air suspension kit, make sure you do your research. Don't let the keyboard clickers resell you another company's parts. We are the manufacturer of our gauges, brackets, air tubes, valves, fittings and tanks. The only thing we don't make is the Viair compressor and the Airlift Dominator air bag and that is because they are great products and a staple in the air ride industry. Why buy from a reseller? Go direct with the manufacturer.

Be on the lookout when you buy brackets from the other guys. They roll metal that they half-way weld, leaving welds unfinished and unsafe. Do you really want your vehicle sitting on that? We make our brackets with seamless pipe that we weld onto a durable steel disk, so you don't have to worry about your brackets bursting from shoddy welds. We also powder coat them to protect from rust while giving you a nice clean look.

This kit includes:


We custom designed this tank to fit nicely in-between the frame rails of most cars. For those who will not be mounting this tank, we offer specially designed brackets that act as feet so the tank may sit comfortably in your trunk. This tank comes with 5 ports total - 2 3/8" ports on the ends, 2 1/2" ports on the opposing faces, and a 1/4" port for the drain on the bottom.

A common misconception with an aluminum tank is that users do not have to worry about rust. As it is true that aluminum does not rust, condensation will occur in any tank, getting into your air lines and valves causing rust and contaminating other major components. Our tank is made out of steel and has a coating inside and out for years of corrosion protection. This tank will last as long as you let it, if properly taken care of. Weight: 22 pounds. Tank Length: 29" (overall length 33" with side flanges). Diameter: 8".


This heavy duty compressor brings the performance of a Viair 480C at less cost, less weight and less heat. These compressors are designed from the ground up to provide premium reliability paired with the performance you expect from a Viair product. The 444C air compressors feature a brand new, patent-pending, "intercooler" head design that helps disperse heat much more efficiently.

It will fill a 2.5 gallon (11 liter) tank from 0 to 200 PSI in five minutes reliably and recharge from 165 back to 200 PSI in under a minute and a half!


Our gauge panel features 2 of our exclusive EZ Air Ride domed glass, dual needle gauges along with 4 paddle valves for front, back, side to side control. These gillet gauge panels were designed to give you that classic look when mounting them in your vehicle. Simply SET IT AND FORGET IT


This pack comes with all of the EZ Air Ride exclusive fittings you need to assemble an EZ Air Ride kit.

Pack Includes:  

  • (6) 1/2" to 1/4" Push to Connect 360 Degree Swivel Elbow
  • (4) 1/8" NPT to 1/4" Air Line Push to Connect 360 Degree Swivel Elbow
  • (4) 1/4" "T" Push to Connect One Touch Fitting
  • (2) 1/4" "Y" Push to Connect One Touch Fitting
  • 160-200 PSI Pressure Switch
  • Brass Air Tank Petcock
  • (2) Brass 1/4" to 3/8" NPT Reducer Bushing

Our SET IT AND FORGET IT line of brackets were designed with you in mind. We have custom made these brackets to fit your specific year vehicle. They are 100% bolt on and require absolutely no welding. Just bolt these in place of your factory coils and you're done. Its as simple as that ; just SET IT AND FORGET IT.


Gen IV Dominator Series D2600; Single; 1/2" Port.

Air Lift Performance is proud to announce the second model from the brand new Dominator Series line of air springs: the Dominator D2600! Featuring an unprecedented maximum restrained pressure of 600 PSI, 9.7" usable stroke, and a load range of 349-3055 lbs; this bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can't go wrong with the new Dominator D2600!


Our air tubing is manufactured by us and make our of Nylon with leak free technology. We five you enough of this air line to bag your entire ride.


This kit comes with all of the incidentals the other guys forget to give you, making our kit truely EZ to install. We have made sure you get everything you need for a fast and fun installation without having to make extra trips to the hardware store.